We are a UK representative of Jordahl & Pfiefer forming part of the J&P group. Other associating companied include H-Bau & SB products.

J&P have been established in the UK now for over 14 years, where as our parent companies have been established combined for over 400 years in the industry.

• Click here for addresses, directions and maps

Most if not all of the products carry manufactures warrantees, and the details of these can be found under the relevant sections.

Yes we keep a large supply of stock in our warehouse, but usually on big orders they will need to be ordered and manufactured, usually taking 7-10 days for delivery.

All dwg files are available for our products if you can not find the one you require on our web site then please contact on of our technical team for assistance.

The hot rolled channel is hot rolled in the factory and is capable of taking a higher dynamic load, where as cold rolled channel is cold rolled in the factory and is not capable of taking such high dynamic loads.

Generally all of our products are available in mild steel and zinc plated. In addition to this our channels are also available in stainless steel and our lifting gear in galvanised.

Yes it will, but if this situation is reversed the RD thread bolt will not fit into the M thread socket.

The best lifting device for this situation would be a long waved anchor as they guarantee a safe transmission of forces into the concrete, which is perfect of a horizontal to vertical lift.

Recommendations on reinforcements and lengths are given by the technical team but the reinforcement is not supplied, as this is typically sized reinforcement bars that are easily available to sites.

The installation details are documented in our ISOPRO catalogue, which can either be found on our website or H-bau’s website.

Yes all ISOPRO units have a standard fire rating of 30 minutes; this can be increased to a maximum of 90 minutes to suit different situations.

Yes it is possible to cut the ISOPRO units into different sizes, but this is not advisable without consulting our technical team, because if cut in the wrong place the capacity of the ISOPRO can be dramatically reduced.

The minimum top edge distance for the TSS 40 is 50mm and the minimum top edge distance for the TSS100 is 70mm.

SB offers many different types of connection techniques such as BCC, BSF, RVK and TSS. These are all shown in our products section along with the SB productions catalogue.